Plenum MaxCell®

Plenum MaxCell

MaxCell, is a flexible textile innerduct solution designed to increase conduit capacity by up to 300% and reduce installation time by 50% when compared to standard rigid innerducts. Now, in addition to the Standard and Detectable products for OSP applications, MaxCell is available in a Plenum rated configuration. Plenum rated MaxCell is designed to provide low-friction pathway advantages for inbuilding environments.

FEATURES & ADVANTAGES
  • Manufactured in the U.S.
  • UL 2024 (OFCR FT-6) Listed – Evaluated for installation in other spaces used for environmental air in accordance with the National Electrical Code, ceiling cavity plenums and raised floor plenums in accordance with NFPA 76 and NFPA 90A as well as riser and general purpose applications.
  • Low-smoke, zero-halogen rated
  • Color differentiated pull tapes are pre-installed within each cell
  • Available in 1”, 2”, 3” and 4” configurations
  • Allows for simplified cable installations – short runs are installed easily and often by hand
  • Allows for easy removal of obsolete cables
PRODUCT PART NUMBER
4" 3-Cell Plenum, Standard Color Black MXP4003BK####
3" 3-Cell Plenum, Standard Color Black MXP3456BK####
2" 3-Cell Plenum, Standard Color Black MXP2003BK####
2" 2-Cell Plenum, Standard Color Black MXP2002BK####
2" 1-Cell Plenum, Standard Color Black MXP2001BK####
1" 3-Cell Plenum, Standard Color Black MXPM3303BK####
1" 2-Cell Plenum, Standard Color Black MXPM3302BK####
1" 1-Cell Plenum, Standard Color Black MXPM3301BK####
Ordering Guidelines
  • "####" = Associated standard length for appropriate reel selection
  • Standard lengths are: 250ft, 500ft, 1,000ft, 2,650ft, 5,300ft and 10,000ft
  • Contact MaxCell customer service regarding custom lengths
  • Reel sizes may vary

* The designation of size listed for MaxCell products is indicative of the minimum conduit interior diameter in which that product should be installed.


  DOWNLOAD THIS PAGE
 

Riser MaxCell

Riser MaxCell

MaxCell, is a flexible textile innerduct solution designed to increase conduit capacity by up to 300% and reduce installation time by 50% over standard rigid innerducts. Now, in addition to the Standard and Detectable products for OSP applications, MaxCell is available in a Riser rated configuration. Riser rated MaxCell is designed to provide the same low-friction pathway advantages for in-building environments.

Features & Advantages
  • Manufactured in the U.S.
  • UL 2024 (OFCR FT-4) Listed – Evaluated for installation in risers in accordance with the National Electrical Code and NFPA 76 as well as general purpose applications.
  • Available in 1”, 2”, 3” and 4” configurations
  • Color differentiated pull tapes are pre-installed within each cell Allows for simplified cable installations – short runs are installed easily and often by hand
  • Allows for easy removal of obsolete cables
PRODUCT PART NUMBER
4” 3-cell Riser, Black Thread MXR4003BK####
3” 3-cell Riser, Black Thread MXR3456BK####
2” 3-cell Riser, Black Thread MXR2003BK####
2” 2-cell Riser, Black Thread MXR2002BK####
2” 1-cell Riser, Black Thread MXR2001BK####
1” 3-cell Riser, Black Thread MXRM3303BK####
1” 2-cell Riser, Black Thread MXRM3302BK####
1” 1-cell Riser, Black Thread MXRM3301BK####
Ordering Guidelines
  • "####" = Associated standard length for appropriate reel selection
  • Standard lengths are: 250ft, 500ft, 1,000ft, 2,650ft, 5,300ft and 10,000ft
  • Contact MaxCell customer service regarding custom lengths
  • Reel sizes may vary

* The designation of size listed for MaxCell products is indicative of the minimum conduit interior diameter in which that product should be installed.


  DOWNLOAD THIS PAGE
 

Self-Supporting MaxCell®

A flexible fabric pathway system designed specifically for transporting cables efficiently in data centers, drop ceilings, and areas that require adaptable reconfigurations. The integrated support structure and multiple pathways reduce the steps required to place cables, minimizing time for installation.

Key Features

  • Plenum-rated MaxCell®
  • Configured with 3 cells to support network flexibility and growth
  • Preinstalled galvanized support wire – strong and flexible
  • Preinstalled color-coded pulling tapes to speed cable installation
  • Works with support systems from an extensive group of manufacturers
Self-Supporting MaxCell

Benefits

  • Installs the same as a standard wire
  • Install bundles of 24 CAT 6 cables without Velcro™ or cable ties
  • Up to 72+ cables in one MaxCell pack
  • Reduce cable install by up to 30% compared to cable tray
  • Reduce cable damage and installation re-work

Part Number

PART NUMBER # PATHWAYS PRODUCT WIDTH MAXIMUM AGGREGATE CABLE DIAMETER STATIC LOAD F
MXP43SSXX 3 3.3" 1.75" 20 lbs

Packaging

Self-Supporting Packaging
  MATERIAL OF CONSTRUCTION   EXACT DIMENSIONS
PACKAGE TYPE Flange Core EMPTY REEL WT. MAXIMUM REEL CAPACITY Height A Width B Core C
Plastic Reel Plastic Plastic 4 lbs 500' 22" 19" 6"
33" x 15" Wood Reel 3/4" Plywood Fiberboard 24 lbs 1000' 33" 15" 8"
33" x 22" Wood Reel 3/4" Plywood Fiberboard 26 lbs 1500' 33" 22" 8"

All dimensions are approximate, are intended to be used for reference purposes and are subject to change. Prior to shipping, all reels are wrapped with a UV protective film. Designers should make every effort to conform to industry standards with regard to distances between any two pull points (generally 600 to 1,000 feet), number of bends (maximum of two 90 degree bends or a total of 180 degrees) between any two pull points, and proofing of conduit pathway using appropriately sized mandrels (normally ¼ to ½ inch less than the inside diameter of the conduit).


  DOWNLOAD THIS PAGE